Free Shipping Worldwide Over $150 | Quantity Discount $10 Each
Size
W325 H250 D40mm
Weight
Approx. 690g
Material
MASTERTEX-08TM (CORDURA Ballistic® Hollofil AirTM 1260d fabric 100% nylon with breathable waterproof film L-Vent® laminated) / CORDURA Ballistic® fabric 1680d nylon (back PVC coating) / steer leather (3M SCOTCHGARD®)
Attention
Please note that it is not completely waterproof and water cannot be prevented from entering through the needle holes in the stitching. If the nylon material is left wet for a long time, the film on the back may peel off or deteriorate, so be sure to dry it before storing it. The water-repellent treatment is a surface treatment, so the effect will fade with use due to friction, etc. In addition, the water-repellent power will be lost due to dust and other dirt that adheres to the fabric. After use, it is recommended to remove dirt by brushing appropriately and use a commercially available water-repellent spray frequently. *Please use a water-repellent spray that is suitable for the material. When using, please read the precautions carefully and then test spray on an inconspicuous part. Due to the nature of the material, there may be slight color variations in the attached leather. Please note that discoloration cannot be avoided.
Item Description
The main material is a fabric that meets the CORDURA® brand fabric production and quality standards of INVISTA, which is made by twisting two strands of 315d Hollofil AirTM (hollow thread of 66 nylon) together and using them as warp and weft threads in a certified factory. It is a fabric that has passed the CORDURA® brand fabric standards and is strong against friction, tearing, and abrasion. The back side is PU coated and laminated with a special breathable waterproof film L-VENT® to further increase water resistance, and it has a three-layer structure with tricot nylon bonded together. It is MSPC PRODUCT's original fabric "MASTERTEX-08TM" that combines durability, water resistance, and water repellency. The leather of the accessories is also made of high-quality steer leather from North America, and during the tanning stage, a waterproofing agent made by "3M" is placed in a drum and allowed to penetrate into the leather. After that, it is dyed and oiled to create a base, and the waterproofing agent made by the same company is sprayed on at the finishing stage to further increase the waterproofing. This leather has passed the 3M "SCOTCHGARD_" monitoring test and is waterproof, oil-proof, and stain-proof. The test is performed even if the surface is scraped, so the effect will not be weakened. The material of the bottom, etc. is INVISTA's 1680D Cordura Balis® Tech Nylon, which has about 5 times the abrasion and tear strength and durability of regular nylon, and the back side is PVC processed to further improve its strength and waterproofness. In terms of functionality, the cushion of the shoulder harness uses Outlast®, a temperature regulating material developed for NASA, and the mesh material is finer and more comfortable to the touch than the one used previously. An original tape with reflective fabric slit into the tape attached in a loop shape is placed at the bottom of the front, taking nighttime safety into consideration.
