Free Shipping Worldwide Over $150 | Quantity Discount $10 Each
Size
W415 H370 D160 mm
Weight
Approx. 470g
Material
Breathable and waterproof 3-layer nylon / Italian cow leather
Attention
Please note that it is not completely waterproof and water cannot be prevented from entering through the needle holes in the stitching. If nylon material is left wet for a long time, the film on the back may peel off or deteriorate, so be sure to dry it before storing it. Water-repellent processing is a surface treatment, so the effect will fade with use due to friction. In addition, the water-repellent power will be lost due to dust and other dirt that adheres to the fabric. After use, we recommend removing dirt by brushing appropriately and using a commercially available water-repellent spray frequently. *Please use a water-repellent spray that is suitable for the material. When using, please read the precautions carefully and then test spray on an inconspicuous part. The attached leather may have wrinkles and scratches unique to individual leather. Please note that color transfer and discoloration may occur due to friction, etc. Please note that since it is natural leather, it may become stained if it gets wet in rain or water. Please note that product specifications are subject to change without notice.
Item Description
The main fabric is made of lightweight nylon woven with 70d warp and 160d weft, laminated with a special microporous film (Breathetec® by Toray Coatex Co., Ltd.) and bonded with tricot nylon, providing high water repellency and moisture permeability of 8,500g/24hr and waterproofing with a water pressure resistance of 11,000mm. The special microporous film in the middle layer has very fine holes of 1 to 30 micrometers, which allows steam to escape while preventing water droplets. This material combines high water resistance, durability, and lightness. The leather used for the accessories is chrome leather from MONFRTNI PELLAMI S.R.L., a long-established tannery based in Milan, Italy, founded in 1898. After chrome tanning, the leather is finished with a semi-aniline finish, which is made by mixing pigments with good color development and transparent dyes and coloring them with a roll coaster machine, resulting in a vivid and elegant color. It is a plain smooth leather with a beautiful surface that exudes a moderate luster. It is a high-quality leather unique to Monfrini Perami, a company that makes leather from Europe with a high fashion sense. The interior fabric is made of master-piece's original camouflage print fabric, designed with the Japanese archipelago as a motif. *The camouflage print fabric specification is limited in quantity. Once the stock runs out, it will be changed to camel color fabric. In addition, you cannot choose the interior fabric. By inserting 5mm thick high-expanded polyethylene foam into one side of the shoulder part, the load on the shoulder is reduced, and the clasp uses a double ring and the front and back torso are designed in common, so it can be used comfortably regardless of the dominant hand. The side pocket, which can be adjusted to the size of the opening with a cord stopper, is not only suitable for storing bottles, but also has a carabiner on the cord end part, so it can be used to store keys, IC cards, etc. Despite its voluminous size, the bag is made of lightweight and soft 3-layer nylon, giving it a rough and sophisticated silhouette. This casual series is great for everyday use, and is also great for outdoor activities and travel, as it is not bulky.
