Free Shipping Worldwide Over $150 | Quantity Discount $10 Each
Size
W340 H225 D95mm
Weight
Approx. 240g
Material
MASTERTEX-06TM (CORDURA® 100d x 420d NYLON 100% breathable waterproof film L-Vent® laminated) MASTERTEX-08TM (CORDURA Ballistic® Hollofil AirTM 1260d fabric 100% nylon breathable waterproof film L-Vent® laminated) Waterproof cow leather (SCOTCHGARD®)
Attention
Please note that it is not completely waterproof and water cannot be prevented from entering through the needle holes in the stitching. If nylon material is left wet for a long time, the film on the back may peel off or deteriorate, so be sure to dry it before storing it. Water-repellent processing is a surface treatment, so the effect will fade with use due to friction, etc. In addition, the water-repellent power will be lost due to dust and other dirt that adheres to the fabric. After use, it is recommended to remove dirt by brushing appropriately and use a commercially available water-repellent spray frequently. * Please use a water-repellent spray that is suitable for the material. When using, please read the precautions carefully and then test spray on an inconspicuous part. Due to the nature of the material, there may be slight color variations in the attached leather. Please note that discoloration cannot be avoided.
Item Description
The main material is MASTERTEX-06 nylon, which is woven into a high-density twill using 100d CORDURA® semi-dull yarn for the warp and 420d CORDURA® bright yarn for the weft, giving it durability and strength, and a refined appearance. MASTERTEX-06TM is a three-layer structure laminated with a special breathable waterproof film L-vent® and bonded with tricot nylon, giving it a water pressure resistance of 20,000mm. The accessory material is a fabric that has passed the CORDURA® brand fabric standard, and is woven using two twisted 315d Hollofil AirTM (66 nylon hollow yarn) threads, which are then aligned and used as the warp and weft threads at a certified factory that meets the production and quality standards of INVISTA's CORDURA® brand fabric. It is a fabric that has passed the CORDURA® brand fabric standard, and is strong against friction, tearing, and abrasion. The back side is PU coated and laminated with a special breathable waterproof film L-VENT® to further increase water resistance, and the tricot nylon is bonded to create a three-layer structure. It is made of "MASTERTEX-08TM" which combines durability, water resistance, and water repellency. The lining is made of traditional 100% cotton club check fabric that symbolizes "Aquascutum", which is used for the lining of the coat, giving it a completely different impression from the inline version. The metal fittings with the brand's logo placed at key points are a design point. The high-density woven double name is a limited edition created for this collaboration project.
